User manual

2
2-218
E/OS Command Line Interface User Manual
show
show.port.info
Syntax info
Purpose This command displays port information for all ports.
Parameters This command has no parameters.
Command Example
Root> show port info
Output The port information data is displayed as a table that includes the
following properties:
Port The port number.
WWN The WWN of the port.
OpSpeed The current operating speed. Valid values are:
Not Established
1G – 1 Gb/sec
2G – 2 Gb/sec
4G – 4 Gb/sec (Sphereon 4400 and Sphereon 4700 only)
10G – 10 Gb/sec (XPM only)
4G Sust – 4 Gb/sec Sustained (QPM only)
4G Burst – 4 Gb/sec Burst (QPM only)
For QPM inactive port, it displays "Supports Port
number (note: the sustained port number)"