User manual

2
CLI Commands
2-217
show
Output The output from show.port.exit includes the following parameters:
Command and
Output Examples
The following examples show the output returned by the three
methods of specifying the show.port.exit command.
Output with single values for both parameters
Root> show port exit 21 10
Exit Port: 45
Output with destDomainId set to all
Root> show port exit all 15
Destination Domain Exit Port
------------------ ----------------
1 23
2 No Domain
3 23
…
31 No Domain
Output with sourcePort set to all
Root> show port exit 1 all
Source Port Exit Port
------------------ ----------------
0 No Source
1 5
2 No Source
3 6
…
Destination
Domain
The destination domain ID to which a preferred path
has been configured. This is displayed only if the
destination domain parameter is set to all.
Source Port The source port for which a preferred path to the
specified destination domain ID is specified. This is
displayed only if the source port parameter is set to
all.
Exit Port This is the actual exit port being used for the given
path. The value No Domain displays when the
destination domain doesn't exist in the fabric. The
value No Source displays when the source port is in
an offline state. The value Fabric Building displays
when the fabric is still building.