User manual

2
2-210
E/OS Command Line Interface User Manual
show
11. SBCCS-Cntrl Unit
12. FC Srvcs
13. FC-FG
14. FC-XS
15. FC-AL
16. SNMP
17. HIPPI-FP
18. Vendor Unique
show.NPIV.config
Syntax config
Purpose This command displays the current NPIV configuration for all ports.
NOTE: The command config.NPIV.show on page 2-27 has functionality that is
identical to this command.
Parameters This command has no parameters.
Command Example
Root> show NPIV config
Output This command displays the following NPIV configuration data:
Output Example
NPIV state: Enabled
Port Max Allowed NPIV Logins
---- -----------------------
110
2 10
310
40
50
7 130...
show.openSysMS.config
Syntax config
NPIV state The current enabled/disabled state of the NPIV
feature.
Max Allowed NPIV
Login Table
A table mapping each port number on the switch
to a corresponding max number of NPIV logins
setting.