User manual

2
CLI Commands
2-209
show
Output Example The output from the show.nameServerExt command appears as
follows:
Type, Port Id, Port Name, Node Name, COS, FC4 Types, SymNodeName, SymPortName,
N, 010400, 00:11:22:33:44:55:00:77, 20:11:22:33:44:55:66:77, 2-3, 2, Node Name A, Port Name A,
N, 010500, 00:11:22:33:44:55:01:77, 20:11:22:33:44:55:66:77, 2-3, 0, This Is Symbolic Node Name B,
Symbolic Port Name B Is Slightly Longer
N, 010600, 00:11:22:33:44:55:66:02, 20:11:22:33:44:55:66:77, 2-3, 2, , ,
FL, 000001, 00:11:22:33:44:55:66:03, 20:11:22:33:44:55:66:77, 2, 0, Loop Node 1, Loop Port 7
FL, 000002, 00:11:22:33:44:55:66:04 20:11:22:33:44:55:66:77, 3, 2, Loop Node 2, Loop Port 7,
show.nameServerFC4Types
Synopsis nameServerFC4Types
Description This command displays the FC4 types.
One or more FC4 types will be displayed in the FC4 field from the
nameserver command. These FC4 types will index into the list of FC4
types in the table. Some of the valid FC4 types are displayed in the
following Output Example.
Parameters This command has no parameters.
Command Example
Root> show nameServerFC4Types
Output Example Show> nameserverFC4Types
0. ISO/IEC 8802-2 LLC
1. ISO/IEC 8802-2 LLC/SNAP
2. SCSI-FCP
3. SCSI-GPP
4. IPI-3 Master
5. IPI-3 Slave
6. IPI-3 Peer
7. CP IPI-3 Master
8. CP IPI-3 Slave
9. CP IPI-3 Peer
10. SBCCS-Channel
FC4 The FC4 types registered for this device. One or more
numbers display in this field. The numbers in this
field correspond to the list in the output example for
show.nameServer on page 2-206.
SymNodeName 255-character representation of the Symbolic Node
Name.
SymPortName 255-character representation of the Symbolic Port
Name.