User manual

2
CLI Commands
2-205
show
Output The event log data are displayed as a table that includes the following
properties:
Output Example The output from the show.linkIncidentLog command appears as
follows:
Date / Time Port Link Incident Event
---------------- ---- ------------------------------------------------------
02/27/03 01:28P 20 Not Operational primitive sequence (NOS) received.
02/27/03 01:28P 4 Primitive sequence timeout.
02/27/03 01:27P 62 Not Operational primitive sequence (NOS) received.
02/27/03 01:27P 62 Invalid primitive seq received for current link state
show.loginServer
Syntax loginServer
Purpose This command displays information from the login server database
for devices attached to this switch. Note that it is possible to have
more than one device per port for any public loop devices attached to
an FL_Port.
Parameters This command has no parameters.
Command Example
Root> show loginServer
Output The device information is displayed as a table that includes the
following properties:
Date/Time The date and time when the event occurred.
Port The number of the port where the link incident
occurred.
Link Incident Event An ASCII string describing the link incident event.
Port The port number where the device is attached.
BB Crdt The Buffer to buffer credit (BB_Credit). The
maximum number of remaining frames that can be
transmitted without causing a buffer overrun
condition at the receiver.
RxFldSz The buffer-to-buffer receive data field size from the
FLOGI received from the attached N_Port.