User manual

2
CLI Commands
2-203
show
NOTE: The QPM FRU is only applicable to Intrepid 6140 and Intrepid 6064.
Output Example The output from the show.frus command appears as follows:
FRU Position State Serial Num Part Num Beacon Pwr On Hrs
----- -------- ------ -------------- --------- ------ ----------
CTP 0 Active 470-000399-700 123456789 False 2800
CTP 1 Backup 470-000399-700 223456789 True 2801
SBAR 0 Active 470-000399-700 223456789 False 2801
SBAR 1 Failed 470-000399-700 223456789 False 2801
FPM 0 Prwoff
FPM 1 Active 470-000399-700 223456789 False 2801
QPM 3 Active 470-000399-700 223456789 False 831
XPM 2 Degred 470-000399-700 223456789 False 831
UPM 4 Active 470-000399-700 223456789 False 831
Power 0 Active 470-000399-700 223456789 False 831
Fan 0 Active 470-000399-700 223456789 False 831
show.ip.ethernet
Syntax ethernet
State The state of the FRU. Values are:
Active—the current module is active.
Backup—this module is not currently being used,
but it is available for immediate failover.
Degraded—the back end path is failed. (QPM and
XPM only).
Powered Off—the module is installed, but powered
off. (Intrepid 6064 and QPM only).
NotInst—the module is not currently installed.
Failed—the current module is failed.
Serial Num The serial number of the FRU. (This field is blank for
power supply modules of the Sphereon 4300 and
Sphereon 4500 switches.)
Part Num The part number of the FRU.
Beacon The beaconing state of the FRU. The valid values are
On or Off.
Pwr On Hrs The power-on hours value for the FRU.