User manual

2
2-202
E/OS Command Line Interface User Manual
show
show.ficonMS
Syntax ficonMs
Purpose This command displays the FICON MS settings.
NOTE: This command is displayed on a Sphereon 3016 only if the feature
key is installed.
Parameters This command has no parameters.
Command Example
Root> show ficonms
Output The data is displayed as a table that includes the following
properties:
Output Example
Ficon MS State: Disabled
Ficon MIHPTO (seconds): 180
show.frus
Syntax frus
Purpose This command displays information about all field-replaceable units
(FRUs).
Parameters This command has no parameters.
Command Example
Root> show frus
Output The FRU information is displayed as a table that includes the
following properties:
Ficon MS State The state of the FICON MS feature.
Ficon MIHPTO The Ficon MIHPTO value in seconds.
FRU The FRU name. (This may show Unknown or Not
Installed if the FRU is not installed.)
The QPM FRU is applicable only to Intrepid 6140.
Position The relative position of the FRU, that is, its slot.