User manual

2
CLI Commands
2-201
show
Output Example Root> show fencing
Name Type State
------------------------ --------------- --------
Default_Protocol_Errors Protocol Errors Enabled
Protocol Errors #2 Protocol Errors Disabled
Safety #2 Protocol Errors Enabled
Root> show fencing Protocol Errors #2
Name: Protocol Errors #2
Ports: 2,4-7,20-24
Type: Protocol Errors
Limit: 5
Period: 1800 seconds
State: Disabled
show.ficonCUPZoning
Syntax ficonCUPZoning
Purpose This command displays the contents of the host control list and the
enabled state of FICON CUP Zoning.
NOTE: The command config.ficonCUPZoning.show on page 2-22 has
functionality that is the same as this command.
Parameters This command has no parameters.
Command Example
show ficonCUPzoning
Output The data is presented as a table with the following properties:
Output Example
FICON CUP Zoning State: Enabled
Host Control List
-----------------------
01:02:03:04:05:06:07:08
09:0A:0B:0C:0D:0E:0F:00
FICON CUP Zoning
State
The enabled state of the FICON CUP Zoning
feature
Host Control List List of 0-8 control hosts, displays “empty” for
control host list with no members.