User manual

1-4

E/OS Command Line Interface User Manual

Entering Command Line Interface Commands

Command Tree

The command tree of the CLI begins from the root. Table 1-2 shows

the CLI command tree. For description of the commands config,

maint, perf, and show, refer to Chapter 2, New and Changed

Commands.

The following commands are not listed in the command tree, but are

globally available and are documented in this chapter:

• login (see login on page 1-17)

• logout (see logout on page 1-18)

• commaDelim (see Using the commaDelim Command on page 1-19)

Table 1-2 shows the command tree hierarchy from the root, reading

from left to right.

^N Control-N Move down one line in the

command history.

^P Control-P Move up one line in the

command history.

^R Control-R Redraw the line.

^U Control-U Clear the input and reset the

line buffer.

^X Control-X Clear the input and reset the

line buffer.

<ESC>[A Up Arrow Move up one line in the

command history.

<ESC>[B Down Arrow Move down one line in the

command history.

<ESC>[C Right Arrow Position the cursor right one

character.

<ESC>[D Left Arrow Position the cursor left one

character.

Table 1-1 CLI Command Tree Navigation Conventions (Continued)

Character Sequence Common Name Action or Description