User manual

2
CLI Commands
2-195
show
* The actual cost and effective cost can be different based on whether ISL cost
configuration is configured or not. If ISL cost configuration is configured,
then links with different speeds will have different costs (1G = 1000, 2G =
1000, 4G = 250, 10G = 100). Actual cost lists the actual cost that based on
the cost configuration and effective cost is the cost assuming that the ISL
cost configuration is not configured.
Output Example
Show.Fabric> showRouteTable
Ingress DID Egress Rem Did Rem Ingress Hops Act Cost Eff Cost PPath
------- --- ------ ------- ----------- ---- -------- -------- -----
1 3 2 3 3 1 1000 1000 No
1 9 5 9 3 1 1000 1000 No
2 1 1 6 63 3 3000 3000 No
2 6 1 6 63 1 1000 1000 No
2 9 5 9 3 1 1000 1000 No
2 10 1 6 63 2 2000 2000 No
5 1 1 6 63 3 3000 3000 No
5 3 2 3 3 1 1000 1000 No
5 6 1 6 63 1 1000 1000 No
5 10 1 6 63 2 2000 2000 No
Show.Fabric> showRouteTable 5
Ingress DID Egress Rem Did Rem Ingress Hops Act Cost Eff Cost PPath
------- --- ------ ------- ----------- ---- -------- -------- -----
5 1 1 6 63 3 3000 3000 No
5 3 2 3 3 1 1000 1000 No
5 6 1 6 63 1 1000 1000 No
5 10 1 6 63 2 2000 2000 No
Show.Fabric> showRouteTable 5 10
Ingress DID Egress Rem Did Rem Ingress Hops Act Cost Eff Cost PPath
------- --- ------ ------- ----------- ---- -------- -------- -----
5 10 1 6 63 2 2000 2000 No
show.fabric.topology
Syntax topology
Purpose This command displays a text description of the fabric. The principal
switch in the fabric will have a "*" next to it.
Parameters This command has no parameters.
Command Example
Root> show fabric topology