User manual

2
CLI Commands
2-193
show
Parameters This command has three parameters. The last 2 parameters are
optional.
Command Example
Root> show fabric ping 6F0613
Output
Output Example
Ping 6F0613
Show.Fabric> ping 6F0613
This command may take up to 20s to complete
Received response from 6F0613 in 57ms.
Received response from 6F0613 in 57ms.
Received response from 6F0613 in 52ms.
Received response from 6F0613 in 58ms.
Show.Fabric> ping 6F0713
This command may take up to 20s to complete
Received response from 6F0713 in 400ms.
Response from 6F0713 timed out
Received response from 6F0713 in 95ms.
Received response from 6F0713 in 80ms.
show.fabric.principal
Syntax principal
Purpose This command displays the WWN of the principal switch in the
fabric.
Parameters This command has no parameters.
Command Example
Root> show fabric principal
Output The data is displayed as a table that includes the following
properties:
destination The destination to be pinged. This parameter can be
an FC ID or the WWN of the destination in the fabric.
count The number of times the destination is to be pinged.
Default is 4. Maximum count possible is 10.
timeout The time the command waits before timing out.
Default is 5s. Maximum possible timeout is 10s.
Time taken (ms) The time taken to get reply from the destination.
Principal Switch
WWN
The WWN of the principal switch in the fabric.