User manual

2
2-192
E/OS Command Line Interface User Manual
show
126, 127, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143,
144
10 12/04/03 08:15A Fabric Operational
Data:
9 12/04/03 08:15A Paths Operational
Data:
8 12/04/03 08:15A Zone Merge Completed
Data:
show.fabric.nodes
Syntax nodes
Purpose This command displays a list of all fabric-attached nodes.
Parameters This command has no parameters.
Command Example
Root> show fabric nodes
Output The data is displayed as a table that includes the following
properties:
Output Example The output from the show.fabric.nodes command appears as follows:
Domain ID Node WWN Port WWN
--------- ----------------------- -----------------------
3 6C:61:62:01:3A:C5:CC:BF 6C:61:62:01:3A:C6:0D:87
show.fabric.ping
Syntax ping destination [count] [timeout]
Description This command pings the specified destination.
Domain ID Domain ID of the switch to which the device is
attached.
Node WWN The Node WWN of the fabric attached node.
Port WWN The Port WWN of the fabric attached port.