User manual

2
CLI Commands
2-191
show
Data:
9 12/04/03 08:15A Paths Operational
Data:
8 12/04/03 08:15A Zone Merge Completed
show.fabricLog.wrap
Syntax wrap [clear]
Purpose This command displays the contents of the wrapping region of the
fabric log. The log entries will not persist over IMLs or power cycles;
it will not be stored in NV RAM.
NOTE: This log will begin to wrap after the log is filled.
Parameters This command has one optional parameter. If no parameter is
specified, then the 1000 entries of the log will be displayed.
Command Example
show fabricLog Wrap
Output This command displays the following data:
Output Example The output of the show.fabricLog.wrap command appears as follows:
Count Date/Time Description
---------- --------------- -------------
11 11/24/03 04:18P Port RSCN
Data: RSCN Reason=2301, Port Offline/Online=26437, Ports 0, 1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 40, 41, 42,
43, 44, 45, 46, 47, 48, 49,50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60,
61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78,
79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96,
97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125,
clear Removes all entries from the log.
Count A constantly incrementing counter.
Date/Time The date and time of the log entry.
Description A description of the log entry.
Data Extended data that is associated to the log entry.