User manual

2
CLI Commands
2-189
show
show.eventLog
Syntax eventLog [clear]
Purpose This command displays the contents of the event log as maintained in
NV-RAM on the director or switch.
Parameters This command has one parameter:
Command Example
Root> show eventLog
Output The event log data are displayed as a table that includes the following
properties.
Output Example The output from the show.eventLog command appears as follows:
Date/Time Code Severity FRU Event Data
---------------- ---- -------- ----- -----------------------------------
04/12/01 10:58A 375 Major CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/12/01 9:58A 385 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/11/01 7:18P 395 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
clear This optional parameter causes all event log entries
to be cleared.
Date/Time The date and time when the event occurred.
Code The event reason code.
Severity The severity of the event. The values are:
Major—Unit operational (major failure).
Minor—Unit operational (minor failure).
Severe—Unit not operational. The causes are either
that the switch contains no operational SBAR cards
or that the system shuts down due to CTP thermal
threshold violations.
Info—Unit operational (information only).
FRU The FRU and FRU position, where applicable.
Event Data The 32-byte hexadecimal description of the event in
words.