User manual

2
2-186
E/OS Command Line Interface User Manual
show
Parameters This command has one parameter.
Command Example
Root> show epFrameLog setFilterPort 63
show.epFrameLog.setTrigger
Syntax setTrigger portNumber offStart bitStart offEnd bitEnd
Purpose This command sets a logging trigger value for the embedded port
frame log.
Port Num The port number to specify “all” for disabling FC2
frame log for all the ports or the port number for
which frame log entries will be recorded.
Valid Port Numbers range from:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
[all] The “all” parameter will make the FC2 log
collect entries from all of the ports on the switch.
[none] The “none” parameter will make the FC2 log
stop collecting entries.