User manual

2
CLI Commands
2-185
show
Header: 22000025 000000EF E1000000 00000000 FFFF0000 00000000
PL: 00010203 04050607 08090A0B 0C0D0E0F 10111213 14151617 18191A1B 1C1D1E1F
show.epFrameLog.removeFilterPort
Synopsis removeFilterPort portNumber
Description This command removes a port from FC2 frame logging filter.
Parameters This command has one parameter which can be either “all” or a port
number.
Command Example
Root> show epFrameLog removeFilterPort 10
show.epFrameLog.setFilterPort
Syntax setFilterPort portNumber
Purpose This command adds a port number to a list of ports that will be
filtered for FC2 frame log. This setting is not be stored in NV RAM
and does not persist after IML.
portnumber The port number to specify “all” for disabling FC2
frame log for all the ports or the port number for
which frame log entries will be recorded.
Valid Port Numbers range from:
0–11 for the Sphereon 4300
0–16 for the Sphereon 3016 and Sphereon 4400
0–24 for the Sphereon 4500
0–32 for the Sphereon 3032 and Sphereon 4700
0–64 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140