User manual

2
CLI Commands
2-183
show
End Offset: 0
End Bit Pattern: FBXXXXX3321
Trigger State: Active
Num of Entries: 6
Start Condition Met: True
End Condition Met: False
show.epFrameLog.disableTrigger
Syntax disableTrigger
Purpose This command clears the embedded port frame log trigger, which
was configured with the command show.epFrameLog.setTrigger.
Parameters This command has no parameters.
Command Example
Root> show epFrameLog disableTrigger
show.epFrameLog.filterClassFFrames
Syntax filterClassFFrames [enable]
Purpose This command will turn on or off the ability to filter out Class-F
frames, or show its current state. When the filtering is enabled,
everything but Class-F frames will be logged. This setting will not be
stored in NV RAM and will not persist after IML.
Parameters This command has one optional parameter. If no parameters are
entered, it will show the current state.
Command Example
Root> show epFrameLog filterClassFFrames enable
show.epFrameLog.noWrap
Syntax noWrap [clear]
Purpose This command displays the contents of the non-wrapping region of
the FC2 frame log. Specifying the optional keyword clear removes all
entries from the non-wrapping region of the log.
filterstate Specifies the on/off state. Valid values are enable
and disable. Boolean 1 and 0 values may also be
substituted.