User manual

2
CLI Commands
2-181
show
• show.security.fabricbinding
• show.openTrunking.config
• show.thresholdAlerts.alerts
• show.fabric.topology
• show.fabric.nodes
• show.security.switchACL
• show.ficonCUPZoning
• show.fencing.Policies
• show.activeAlias
show.auditLog
Syntax auditLog [clear]
Purpose This command displays the entries of the audit log after the last time
the log was cleared.
Parameters This command has one optional parameter:
Command Example
show auditLog
Output The output from this command displays the following data:
Output Example
Date/Time Action Source User Id
clear Adding the optional clear parameter removes all
entries from the log. If the log is full, it will resume
collecting log entries.
Date/Time The date and time of the log entry.
Action Type of audit log event.
Source Source of audit log event.
User ID Identifier of the user that made the command.
Usually an IP address.