User manual

2-180

E/OS Command Line Interface User Manual

show

11:22:33:44:55:66:77:01 NAME1

11:22:33:44:55:66:77:02 NAME2

11:22:33:44:55:66:77:03 NAME3

11:22:33:44:55:66:77:04 NAME4

show.all

Syntax all

Purpose This command displays all configuration and status information that

are available. The command results in a sequential display of the

output of other CLI show commands. This set of show commands

returns the full configuration and status of the switch and fabric.

Parameters This command has no parameters.

Command Example

Root> show all

Output The output of this command is a sequential display of the output of

other CLI show commands. The commands are displayed in the

following order:

• show.ip.ethernet

• show.system

•show.switch

• show.openSysMS.config

• show.port.config

•show.frus

• config.snmp.show

• show.zoning

• show.port.state

• show.port.info

• show.port.technology

• show.loginserver

•show.features

• show.security.portbinding

• show.security.switchbinding