User manual

2
CLI Commands
2-179
show
show
The show branch of the CLI command tree contains commands that
display, but do not change, stored data values. The displayed output
that results from these commands is not necessarily identical with the
output from the show commands that are within the other CLI
command tree branches, for example, config.port.show.
The commands in the show branch can by used by either the
administrator or the operator.
show.activeAlias
Synopsis activeAlias
Description This command displays the active WWN aliases.
Parameters This command has no parameters.
Command Example
Root> show activeAlias
Output The following attributes are displayed by this command.
Output Example
show> activeAlias
CLI Alias enabled state: Disabled
Web Alias enabled state: Disabled
Total Associations Possible: 250
Current Association Count: 9
WWN Alias
----------------------- ------------------------
CLI Alias enabled
state
The CLI enabled/disabled state of WWN aliases.
WEB Alias enabled
state
The WEB enabled/disabled state of WWN aliases.
Total associations
possible
The total number of possible associations.
Current association
count
The number of configured associations.
WWN The WWNs with configured aliases.
Alias The Aliases associated with the WWNs.