User manual

2
CLI Commands
2-163
perf
Specifying a port type removes all the ports from the alert and
applies the alert to each port that is the specified type of port. Valid
values are:
•eport
•fport
• flport (Sphereon 4300 and Sphereon 4500 only)
NOTE: A counter threshold alert is not allowed to specify both port types
and individual port numbers.
Command Example Root> perf thresholdAlerts counter addPort checklinks 12
perf.thresholdAlerts.counter.removePort
Syntax removePort name portNumber
Purpose This command removes a port from the specified counter threshold
alert.
portNumber Specifies the port number or port type. Valid port
number values:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
all applies the counter threshold alert to every port
on the product.