User manual

2
CLI Commands
2-161
perf
•Signal Losses
• Protocol Errors
• Invalid Tx Words
•CRC Errors
• Frames Too Short
• Delimiter Errors
• Link Sequence Counts Summed Set
• Link Resets Received
•Link Reset Sent
•OLS Received
•OLS Sent
• Logical Link Errors Summed Set
• Discarded Frames
• Address ID Errors
• Class 2 Busied Frames
• Class 2 Rejected Frames
• Class 3 Discarded Frames
perf.thresholdAlerts.counter.addAlert
Syntax addAlert name
Purpose This command configures a new counter threshold alert and assigns
it a name. The new alert is assigned default settings which can then
be changed using the other counter threshold alert commands.
The default settings for a new counter threshold alert are as follows:
• Ports: None
• Counter: None
• Increment: 100
• Interval: 60 minutes
•State: Disabled