User manual

2
CLI Commands
2-159
perf
4. Identify the percentage of throughput that triggers the
throughput threshold alert using the command
perf.thresholdAlerts.throughput.setUtilPercentage on page 2-174.
5. Configure the threshold alert using other perf.thresholdalert
commands. For example, you may want to set the duration and
interval times for the alert, as described in
perf.thresholdAlerts.throughput.setParams on page 2-175. Use the
following commands to view alert settings and configure an alert:
• perf.thresholdAlerts.throughput.removePort on page 2-172
• perf.thresholdAlerts.throughput.setParams on page 2-175
• perf.thresholdAlerts.throughput.show on page 2-175
• perf.thresholdAlerts.throughput.showUtilTypeTable on page 2-176
6. Once the alert is fully configured, it can be activated using the
perf.thresholdAlerts.setState command, described on 2-168. You
will need to disable an alert before you can modify it.
Alert Types and Counters
Table 2-2 provides a list of throughput threshold alerts.
Table 2-3 provides a list of threshold alert counters and counter sets.
Table 2-2 Throughput Threshold Alerts
Utilization Code Threshold Alert Type
Tx Util TTA - Transmit Utilization
Rx Util TTA - Receive Utilization
Tx/Rx Util TTA - Transmit or Receive
Utilization
Table 2-3 Alert Counters
Number Threshold Alert Counter or Counter Set
1Link Resets Sent
2 Link Resets Received
3OLS Sent
4OLS Received