User manual

2
2-156
E/OS Command Line Interface User Manual
perf
Output The output from the perf.preferredPath.showPath command includes
the following parameters:
Command and
Output Examples
The following examples show the output returned by the three
methods of specifying the perf.preferredPath.showPath command.
Single values for both parameters
Root> perf preferredPath showPath 21 10
Preferred Path State: Enabled
Preferred Exit Port: Not Configured
destDomainId set to all
Root> perf preferredPath showPath all 15
Preferred Path State: Enabled
Destination Domain Preferred Exit Port
------------------ -------------------
1 23
3 24
4 23
17 12
sourcePort set to all
Root> perf preferredPath showPath 1 all
Preferred Path State: Enabled
Source Port Preferred Exit Port
------------------ -------------------
0 2
2 5
3 17
22 5
Destination
Domain
The destination domain ID for which a preferred
path has been configured. This is displayed only if
the destination domain parameter is set to all.
Source Port This is the source port for which a preferred path to
the specified destination domain ID is specified. This
is displayed only if the source port parameter is set to
all.
Preferred Exit Port The configured preferred path exit port. This value
can be any port number, or blank to indicate that no
preferred path has been configured.