User manual

2
2-154
E/OS Command Line Interface User Manual
perf
Command Example Root> perf preferredPath setPath 17 5 11
perf.preferredPath.setState
Syntax setState enabledState
Purpose This command enables or disables the preferred path feature.
NOTE: Insistent domain IDs must be used in order to enable the preferred
path state.
Parameters This command has one parameter:
Command Example
Root> perf preferredPath setState enable
exitPort Specifies the number of the desired exit port. Valid
port numbers values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the ED-5000
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
enabledState Sets the state of the preferred path feature.
When disabled, the preferred path settings
are ignored for all path selection decisions.
Accepted values for this command are enable
and disable. Boolean 1 and 0 may be
substituted as values.