User manual

2-152

E/OS Command Line Interface User Manual

perf

perf.preferredPath.clearPath

Syntax clearPath destDomainID sourcePort

Purpose This command deletes a preferred path. The command causes the

specified path to use a path selection algorithm that is different from

the preferred path. All configured paths can be removed by

specifying the all parameter for both the destination domain ID and

source port.

Parameters This command has the following parameters:

Command Example

Root> perf preferredPath clearPath 10 5

destDomainId Specifies the destination domain ID. Valid domain

IDs are in the range 1–31 or all, which deletes all

preferred paths to and from the source port specified

in the sourcePort parameter.

sourcePort Specifies the number of the source port. Valid port

numbers values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016 and 3216

0–15 for the Sphereon 4400

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032 and 3232

0–31 for the ED-5000

0–31 for the Sphereon 4700

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

Or you can specify all to delete all paths to the

destination domain ID.