User manual

2
2-150
E/OS Command Line Interface User Manual
perf
Output Example The output from the perf.openTrunking.show command appears as
follows:
Port Number: 1
Congestion Threshold (%): 56
Flows Rerouted To: 26739
Flows Rerouted From: 23987
Unresolved Congestion: Enabled
Backpressure: Disabled
Low BB_Credit Threshold (%): 75 (default)
perf.openTrunking.unresCongestion
Syntax unresCongestion unresolvedCongestionState
Purpose This command configures the Unresolved Congestion state of the
OpenTrunking configuration. If the state is configured to be enabled,
an unresolved congestion entry is made to the Event Log and an
SNMP trap is generated if SNMP is configured.
Parameters This command has one parameter:
Command Example
Root> perf openTrunking unresCongestion 1
Unresolved
Congestion
The current enabled/disabled state of the unresolved
congestion trunking feature. (The indicated state
applies to every port on the product.)
Backpressure The current enabled/disabled state of the
backpressure trunking feature. (The indicated state
applies to every port on the product.)
Low BB_Credit
Threshold
The current threshold setting of the Low BB_Credit
Threshold trunking feature. If the value is a default
value, (default) is displayed next to the percentage.
(The indicated value applies to every port on the
product.)
unresolvedCongestionState This parameter can be set to enable or
disable the Unresolved Congestion state of
the OpenTrunking configuration. Boolean
1 and 0 values may also be substituted.