User manual

2
CLI Commands
2-149
perf
perf.openTrunking.show
Syntax show portNumber
Purpose This command displays the current OpenTrunking configuration per
port.
Parameters This command has one parameter:
Command Example
Root> perf openTrunking show 11
Output The OpenTrunking configuration data is displayed as a table that
includes the following statistics:
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 4700
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Congestion
Threshold
The threshold is listed as a percentage. If the value is
a default value, (default) is displayed next to the
percentage.
Flows Rerouted To Trunking statistic displaying flows rerouted to the
specified port. (These statistics are cleared by the
perf.clearStats command.)
Flows Rerouted
From
Trunking statistic displaying flows rerouted from the
specified port. (These statistics are cleared by the
perf.clearStats command.)