User manual

2
CLI Commands
2-141
perf
Output Example The output from the perf.class2 command appears as follows:
Port 2
Statistic Wrap Count
-------- ------------- ------------
RxFrames 23 2953184
TxFrames 12 1842953
RxWords 65 2953184
TxWords 32 1842953
Busied Frms 0 2953184
Rjct Frames 0 1842953
perf.class3
Syntax class3 portNumber
Purpose This command displays port Class 3 counters for a single port.
Parameters This command has one parameter:
TxWords The number of Class 2 4-byte words within frames
that the port has transmitted.
Busied Frms The number of times the FBSY (Fabric Busy link
response) was returned to this port as a result of a
Class 2 frame that could not be delivered to the other
end of the link. This occurs if either the fabric or the
destination port is temporarily busy.
Rjct Frames The number of times the FRJT (Frame Reject link
response) was returned to this port as the result of a
Class 2 frame that was rejected by the fabric.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 45000
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140