User manual

2
CLI Commands
2-139
perf
Command Example Root> perf AFD HDDReport evtlog
perf.AFD.POMReport
Syntax POMReport logSetting
Description This command configures the Predictive Optics Monitoring (POM)
event reporting configuration.
Parameters This command has one parameter:
Command Example
Root> perf AFD POMReport evtlogemail
perf.AFD.show
Syntax show
Description This command displays all the configured settings under AFD.
Parameters This command has no parameters.
Command Example
Root> perf AFD show
Output The configured settings are displayed as described in the following
table:
Output Example
Perf.AFD> show
logSetting
This parameter has the following values:
• nolog - disables logging.
• evtlogemail - logs all POM events to the event
log and enables email notification for these
events, if email notification is enabled.
• evtlogemailcallhome - logs all events to the
event log and enables email notification and
call home notification for these events, if
email notification and call home notification
are enabled.
HDD Logging The current HDD logging value.
POM Logging The current POM logging value.