User manual

2
CLI Commands
2-137
maint
The default values are set in the firmware of the director or switch.
For information about the default values, refer to the service manual
of your director or switch.
Parameters This command has no parameters.
Command Example
Root> maint system resetConfig
maint.system.setOnlineState
Syntax setOnlineState onlineState
Purpose This command sets the switch online or offline.
Parameters This command has one parameter:
Command Examples
Root> maint system setOnlineState true
Root> maint system setOnlineState 1
onlineState Specifies whether the switch is online. Valid values
are true and false. Boolean 1 and 0 may be substituted
as values.