User manual

2
CLI Commands
2-133
config
config.zoning.showPending
Syntax showPending
Purpose This command shows the zoning configuration in the work area of
the zone set that has not yet been activated.
Parameters This command has no parameters.
Command Example
Root> config zoning showPending
Output The zoning configuration data is displayed as a table that includes
the following properties:
Output Example The output from the config.zoning.showPending command appears as
follows:
Pending Zone Set
Default Zone Enabled: False
ZoneSet: TheNewUltimateZoneSet
Zone: TheNewUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
Zone: TheNewNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNewNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
Local ZoneSet The enabled status, name, and member zones of the
zone set.