User manual

2
2-132
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Examples
Root> config zoning setDefZoneState false
Root> config zoning setDefZoneState 0
config.zoning.showActive
Syntax showActive
Purpose This command shows the zoning configuration saved on the fabric.
Parameters This command has no parameters.
Command Example
Root> config zoning showActive
Output The zoning configuration data is displayed as a table that includes
the following properties.
Output Example The output from the config.zoning.showActive command appears as
follows:
Active Zone Set
Default Zone Enabled: False
ZoneSet: TheUltimateZoneSet
Zone: TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone: TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
defaultZoneState Specifies whether the default zone is enabled. Valid
values are true and false. Boolean 1 and 0 may be
substituted as values.
Active ZoneSet The enabled status, name, and member zones of the
zone set.