User manual

2
CLI Commands
2-129
config
Command Example Root> config zoning deletePortMem TheUltimateZone 10 5
config.zoning.deleteWwnMem
Syntax deleteWwnMem zoneName wwn
Purpose This command removes a WWN member from a zone that is in the
work area.
Parameters This command has two parameters:
Command Example
Root> config zoning deleteWwnMem TheNotSoUltimateZone
10:00:00:00:C9:22:9B:AB
portNumber Specifies the port number of the member to be
deleted from the zone. Valid port numbers values
are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the Sphereon 4700
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
zoneName Specifies the name of the zone that contains the
member to be deleted.
wwn Specifies the WWN of the member to be deleted from
the zone. The value of the WWN must be in
colon-delimited hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00).