User manual

2
2-128
E/OS Command Line Interface User Manual
config
config.zoning.deactivateZoneSet
Syntax deactivateZoneSet
Purpose This command places all attached devices in the default zone and
takes effect immediately for the entire fabric. This command clears
both the active zone set and the working area. This command takes
effect immediately in the fabric.
NOTE: The default zone must be activated independently of this command.
Parameters This command has no parameters.
Command Example
Root> config zoning deactiveZoneSet
config.zoning.deletePortMem
Syntax deletePortMem zoneName domainId portNumber
Purpose This command deletes a domain ID and port number for a zone
member in the specified zone in the work area.
Parameters This command has three parameters:
zoneName Specifies the name of the zone that contains the
member to be deleted.
domainId Specifies the domain ID of the member that has to be
deleted from the zone. Valid domain IDs are in the
range 1–31.