User manual

2
CLI Commands
2-127
config
Parameters This command has one parameter:
Command Example
Root> config zoning addZone TheUltimateZone
config.zoning.clearZone
Syntax clearZone zoneName
Purpose This command clears all zone members for the specified zone in the
work area. This command does not change the zone name.
Parameters This command has one parameter:
Command Example
Root> config zoning clearZone TheNotUltimateAtAllZone
config.zoning.clearZoneSet
Syntax clearZoneSet
Purpose This command clears the zone set contained in the work area,
removing all zones, and takes effect immediately. This command
does not change the zone set name.
Parameters This command has no parameters.
Command Example
Root> config zoning clearZoneSet
zoneName Specifies the name of the new zone. The zoneName
must contain 1–64 characters. Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijkl
mnopqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character must
be alphabetical.
zoneName Specifies the name of the zone to be cleared.