User manual

2-126

E/OS Command Line Interface User Manual

config

Command Example Root> config zoning addPortMem TheUltimateZone 10 6

config.zoning.addWwnMem

Syntax addWwnMem zoneName wwn

Purpose This command adds a WWN zone member to the specified zone in

the work area.

NOTE: A product can have at most 4096 zone members in its zones.

NOTE: The ED-5000 supports a maximum of 512 zones.

Parameters This command has two parameters:

Command Example

Root> config zoning addWwnMem TheUltimateZone

10:00:00:00:C9:22:9B:64

config.zoning.addZone

Syntax addZone zoneName

Purpose This command adds a new (empty) zone to the zone set in the work

area.

NOTE: Changes are not activated on the switch until the

config.zoning.activateZoneSet command is issued.

NOTE: A zone set can have max of 4096 unique zone member.

NOTE: A switch or director can have maximum of 2048 zones in a zone set,

except for the ED-5000, which allows a maximum of 512 zones.

zoneName Specifies the name of the zone.

wwn The WWN of the member to be added to the zone.

The value of the WWN must be in colon-delimited

hexadecimal notation (for example,

AA:00:AA:00:AA:00:AA:00).