User manual

2
2-122
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config system description
McDATAIntrepid6140FibreChannelDirector
config.system.location
Syntax location systemLocation
Purpose This command sets the system location attribute.
Parameters This command has one parameter:
Command Example
Root> config system location Everywhere
config.system.name
Syntax name systemName
Purpose This command sets the system name attribute.
Parameters This command has one required parameter:
Command Example
Root> config system name JoeSwitch
config.system.show
Syntax show
Purpose This command shows the system configuration.
systemDescription Specifies the new system description string for the
director or switch. The name can contain 0–255
characters.
systemLocation Specifies the new system location for the director or
switch. The location can contain 0–255 characters.
systemName Specifies the new system name for the switch or
switch. The name can contain 0–24 characters.