User manual

2
CLI Commands
2-117
config
Parameters This command has one parameter:
Command Example
Root> config switch webState enable
config.switch.zoneFlexPars
Syntax zoneFlexPars zoneFlexParstate
Purpose This command configures the state of Zone FlexPars.
Parameters This command has one parameter:
Command Example
Root> config switch zoneFlexPars fabric
config.switch.zoningRSCN
Syntax zoningRSCN zoningRSCNState
Description This command sets the state of Zoning RSCNs.
Parameters This command has one parameter:
config.syslog
The syslog feature records events such as logins, configuration
changes, and error messages that occur on the switch. If an error
condition occurs, the switch attempts to write an entry to the system
webEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be substituted.
zoneFlexParsState This parameter can be set to fabric and none. When
set to fabric, RSCNs will only be sent to affected
fabric members when zoning information changes.
When set to none, filtering of RSCNs will not take
place, and RSCNs will be sent to all zoneset
members when zoning information changes.
zoningRSCNState This parameter can be set to enable, disable, true, or
false. Boolean 1 and 0 values may also be substituted.