User manual

2
2-116
E/OS Command Line Interface User Manual
config
Output Example The output from the config.switch.show command appears as follows:
R_A_TOV: 100
E_D_TOV: 20
Preferred Domain ID: 1
Domain ID Offset: 96
Switch Priority: Default
Speed: 2 Gb/sec
Rerouting Delay: Disabled
Interop Mode: McDATA Fabric 1.0
Insistent Domain ID: Enabled
Domain RSCN: Enabled
Zoning RSCN: Enabled
Limited Fabric RSCN: Disabled
Zone FlexPars: No Filtering
RSCN Zone Isolation: No Filtering
Safe Zoning: Disabled
ISL FSPF Cost: By Port Speed
Web Enabled: Enabled
API Enabled: Enabled
Password Exp. Time: 0
config.switch.webState
Syntax webState webEnabledState
Purpose This command sets the state of the web interface. When disabled,
access through the web interface will be turned off.
RSCN Zone Isolation When set to fabric, RSCNs will only be sent to
affected fabric members when zoning information
changes. When set to none, filtering of RSCNs will not
take place, and RSCNs will be sent to all zoneset
members when zoning information changes.
Safe Zoning Safe Zoning State.
ISL FSPF Cost The method for computing the FSPF cost for ISLs.
Web Enable The enabled state of web.
API Enable API enable state.
HA Mode The enabled state of high availability mode.
Domain ID offset This configures Domain ID offset.
PassExpirationDays The password expiration time in days for the
management users.