User manual

xvi
E/OS Command Line Interface User Manual
Preface
The publications listed in Related Publications provide considerable
information about both concepts and McDATA products.
Organization of This
Manual
This publication is organized as follows:
• Chapter 1, Introduction, provides an introduction and overview of
the Command Line Interface.
• Chapter 2, CLI Commands, describes the CLI commands,
including their syntax, purpose, and parameters, as well as
examples of their usage and any output that they generate.
• Appendix A, Error Messages lists and explains error messages that
may appear while using the CLI.
• Appendix B, Commands and Corresponding Releases lists each
command in the CLI and the release in which the command was
added to the CLI.
•The Glossary defines terms, abbreviations, and acronyms used in
this manual.
•An Index is also provided.
Manual Updates Check the McDATA web site at www.mcdata.com (Resource
Library-->Technical Documents-->User Manual) for possible updates
or supplements to this manual.
Related Publications Other publications that provide additional information about the
products mentioned in this manual are:
• Configuration Backup and Restore Utility Installation and User Guide
(958-000370)
• McDATA Products in a SAN Environment - Planning Manual
(620-000124)
• Intrepid 6064 Director Installation and Service Manual (620-000108)
• Intrepid 6140 and 6064 Directors Element Manager User Manual
(620-000172)
• Intrepid 6140 Director Installation and Service Manual (620-000157)
• EFCM Basic User Manual (620-000240)
• McDATA E/OS SNMP Support Manual (620-000131)
• Sphereon 3016 and 3216 Fabric Switch Element Manager User Manual
(620-000174)