User manual

2
2-106
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter.
Command Example
Root> config switch banner setWebState 0
config.switch.banner.show
Syntax show
Description This command displays the configured banner.
Parameters This command has no parameters.
Command Example
Root> config switch banner show
Output The login banner and settings are displayed on the screen.
Output Example
Config.Switch> banner
Config.switch.banner> show
CLI Banner Enabled State: Disabled
Web Banner Enabled State: Disabled
Banner content:
McDATA (R) Fibre Channel Director Firmware Version
09.00.00
Access is restricted to Authorized personnel only
config.switch.banner>
config.switch.domainIDOffset
Syntax domainIDOffset offset
Description This command configures the offset of the Domain ID range in which
the switch or director should operate.
state The enabled/disabled state for CLI banner. This
parameter can be set to enable or disable. Boolean 1
and 0 values may also be substituted.