User manual

2
2-104
E/OS Command Line Interface User Manual
config
config.switch.apiState
Syntax apiState apiEnabledState
Purpose This command sets the state of the API interface. When disabled,
access through the API interface will be turned off.
Parameters This command has one parameter:
Command Example
Root> config switch apiState enable
config.switch.banner
The banner command on the configuration branch enters the banner
configuration branch. All commands operate on the banner content
and the state of the banner.
This configured banner text is displayed during login through CLI or
EFCM Basic, if banner state is enabled. Refer to
config.switch.banner.bannerText for configuring the banner text.
For example, when the user connects to the switch using the telnet
command:
McDATA (R) Fibre Channel Director Firmware Version
09.00.00
Access is restricted to Authorized personnel only
Username>
config.switch.banner.bannerText
Syntax bannerText lineNumber lineContent
Description This command configures the banner text for a particular line
number.
apiEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be substituted.