User manual

2
CLI Commands
2-103
config
Output This command displays the following switch configuration data:
Command Example
Root> Config SNMP validateUser Jerry v1 noauthnopriv
Username: Jerry
Auth Protocol: No Authentication
Priv Protocol: No Privacy
Security Model: V1
Security Level: No Authentication and No Privacy
Context Match: Prefix
Group Name: Group1
Read View: internet
Write View: management
Notify View: private
config.switch
All commands under this branch operate on a particular switch
attribute. Switch attributes are specific to the Fibre Channel switch
nature of the product.
Some of the config.switch commands require that the switch be set
offline. (Use the maint.system.setOnlineState to set the switch offline.)
If some of these commands are entered while the switch is online, an
error message results.
Username The user name.
Auth Protocol The authentication protocol used for this user.
Priv Protocol The privacy protocol used for this user.
Security Model The security model for this user.
Security Level The security level for this user.
Context Match The context match method.
Group Name The group that this user belongs to.
Read View The read view access for this user.
Write View The write view access for this user.
Notify View The notify view access for this user.