User manual

2
2-102
E/OS Command Line Interface User Manual
config
Output This command displays the following switch configuration data:
Command Example
config.snmp> showViewTable
View Name Type Object ID
-------------------------------- ------------------ ---------
no_access View Excluded .1.3.6.1
internet View Included .1.3.6.1
management View Included .1.3.6.1.2
experimental View Included .1.3.6.1.3
private View Included .1.3.6.1.4
snmpv3 View Included .1.3.6.1.6
fceos View Included .1.3.6.1.4.1.289
fcmgmt_3_1 View Included .1.3.6.1.2.1.8888
fcmgmt_3_0 View Included .1.3.6.1.3.94
fcfe View Included .1.3.6.1.3.42
system View Included .1.3.6.1.2.1.1
ip View Included .1.3.6.1.2.1.4
config.snmp.validateUser
Syntax validateUser username secModel secLevel
Purpose This command searches the user, group, and access tables for the
given username, security model, and security level. If the username,
security model, and security level cannot be traced in these tables, a
message will be displayed with the reason.
Parameters This command has three parameters:
View Name The name of the view.
Type The type of the view.
Object ID The Object ID.
username The user name for the user validation.
secModel The security model of the user.
secLevel The security level of the user.