User manual

2
2-82
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config security ssl setWebState 0
config.security.ssl.setAPIState
Syntax setAPIState sslEnabledState
Purpose This command sets the enabled state for the SSL API interface. The
default API access is non-secure. If SSL is enabled, there is no visual
indication provided to the end user.
Parameters This command has one parameter:
Command Example
Root> config security ssl setAPIState 1
config.security.ssl.show
Syntax show
Purpose This command displays the SSL certificate, its MD5 and SHA-1
fingerprints, and the SSL enabled states for the web and API
interfaces.
Parameters This command has no parameters.
Command Example
Root> config security ssl show
Output
sslEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be substituted.
sslEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be substituted.
Web Enable State The SSL enabled state for the web interface.
API Enable State The SSL enabled state for the API interface.
Renegotiation MB The SSL MB limit before renegotiation will take
place.