User manual

2
CLI Commands
2-79
config
Output This command displays the following switch binding configuration
data:
Output Example The output from the config.security.switchBinding.show command
appears as follows:
Switch Binding State: Enabled and Restricting E_Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
config.security.ssl
The Secure Socket Layer (SSL) protocol ensures secure transactions
between web servers and browsers. The protocol uses a third party, a
Certificate Authority (CA), to identify one or both ends of the
transactions using a public key and private key concept. The public
key is issued by the web server to the web browser, which uses this
key to encrypt its URL and other HTTP data and sends it back to the
web server. This encrypted key is decrypted by the web server using
a private key.
config.security.ssl.generateKeys
Syntax generateKeys validDays
Purpose This command generates a new SSL public certificate and private
key. The certificate will be valid for the number of days specified.
Unlike the resetKeys command, this command does not wait until the
next SSL connection to generate the key. Instead, it generates the
certificate and private key immediately.
switchBindingState The state of switch binding, which can have the
following values:
Disabled
Enabled and Restricting F_Ports
Enabled and Restricting E_Ports
Enabled and Restricting All Ports
Switch Binding
Membership List
The WWNs of members of the SBML saved on
the switch.