User manual

2
2-78
E/OS Command Line Interface User Manual
config
Command Example Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.setState
Syntax setState switchBindingState
Purpose This command sets the switch binding state on the switch.
Parameters This command has one parameter:
Command Example
Root> config security switchBinding setState allRestrict
config.security.switchBinding.show
Syntax show
Purpose This command displays the switch binding configuration.
Parameters This command has no parameters.
Command Example
Root> config security switchBinding show
switchBindingState Sets the switch binding state for the switch. Valid
values are:
disable - Disables switch binding. Devices (servers,
storage, and other switches) are allowed to connect
to the switch without restrictions.
eRestrict - Enables switch binding and restricts
E_Port connections. E_Ports are prevented from
forming ISL connections unless explicitly
identified in the SBML. F_Port connections are
allowed without restriction.
fRestrict - Enables switch binding and restricts
F_Port connections. Server and (or) storage devices
are prevented from forming F_Port connections
with the switch unless explicitly identified in the
SBML. E_Ports are allowed to form ISL
connections without restriction.
allRestrict - Enables switch binding and restricts
E_Port and F_Port connections. Both E_Ports and
F_Ports prohibit connections with all devices
unless explicitly identified in the SBML.