User manual

2
CLI Commands
2-77
config
• If Enterprise Fabric Mode is enabled and the switch or director is
online, Switch Binding cannot be disabled.
• If Enterprise Fabric Mode is enabled and the switch or director is
offline, users can disable Switch Binding, but this also disables
Enterprise Fabric Mode.
• WWNs can be added to the SBML regardless of whether Switch
Binding is enabled or disabled.
config.security.switchBinding.addMember
Syntax addMember wwn
Purpose This command adds a new member to the SBML. A maximum
number of 256 members may be added to the SBML.
Parameters This command has one parameter:
Command Example
Root> config security switchBinding addMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.deleteMember
Syntax deleteMember wwn
Purpose This command removes a member from the SBML. You cannot
remove any member currently logged into the switch or director.
Parameters This command has one parameter:
wwn Specifies the switch or N_Port device WWN of the
member to be added to the SBML. The value of the
WWN must be in colon-delimited hexadecimal
notation (for example, AA:00:AA:00:AA:00:AA:00).
wwn Specifies the switch or N_Port device WWN of the
member to be removed from the SBML. The value of
the WWN must be in colon-delimited hexadecimal
notation (for example, AA:00:AA:00:AA:00:AA:00).
You may also enter all for this argument to clear the
SBML completely. Note that you cannot clear a
WWN that is currently logged into the switch.