User manual

2-74

E/OS Command Line Interface User Manual

config

MIHxMIGoBgcqhkjOOAQBMIGcAkEAt+W14KwlGwHMzV15vSBxNXpMckhr

3gpVOAkq/6ACLZDDGD8Izlq+mxK0afu7Ir5hexE9v5potwk0fk38kwPh

MQIVAN/hih31RuuaQTNgQNVAtrTDkFBVAkBaYRsm4Fj7/4i8Lt7OydKJ

cYTMAJhJ71UboAVFpmfyVpCQOh3RFK9HfNYJYjkTaSTB3QQt9Hz1HilU

/oKSx8aBA0QAAkEAh0B1piZzDUfXmLuKsIf2sst7lSXfgtkxg85dfpPy

JMSqM6M93D5wM3Nh/O54tSefEDi559HftVsX4YFKmYXV+w==

-----END PUBLIC KEY-----

MD5 Fingerprint:

d1:f2:aa:9d:ec:92:de:38:75:d0:47:2f:9c:cb:b2:02

SHA-1 Fingerprint:

dc:f5:33:c8:e0:8b:01:4b:ce:b5:68:a1:55:2b:dd:8f:a5:5c:8c

:26

config.security.switchAcl

The access control list (ACL) feature allows the administrator to

configure a set of IP addresses that are allowed to make an IP

management connection to the switch or director.

config.security.switchAcl.addRange

Syntax addRange startIPAddress endIPAddress

Purpose This command adds a new range of IP addresses to the access control

list.

Parameters This command has the following parameters:

NOTE: The maximum number of entries in this command is 32.

Command Example Root> config security switchAcl addRange 10.0.0.0

10.0.0.2

startIPAddress The starting IP Address of the range to be added. The

address must be entered in dotted decimal form

(such as, 10.0.0.0).

endIPAddress The ending IP Address of the range to be added. The

address must be entered in dotted decimal form

(such as, 10.0.0.0).